usdrt::UsdGeomPlane

Defined in usdrt/scenegraph/usd/usdGeom/plane.h

class UsdGeomPlane : public usdrt::UsdGeomGprim 

Defines a primitive plane, centered at the origin, and is defined by a cardinal axis, width, and length. The plane is double-sided by default.

The axis of width and length are perpendicular to the plane’s axis:

axis	width	length
X	z-axis	y-axis
Y	x-axis	z-axis
Z	x-axis	y-axis

For any described attribute Fallback Value or Allowed Values below that are text/tokens, the actual token is published and defined in UsdGeomTokens. So to set an attribute to the value “rightHanded”, use UsdGeomTokens->rightHanded as the value.

Public Functions

inline explicit UsdGeomPlane(const UsdPrim &prim = UsdPrim()): Construct a UsdGeomPlane on UsdPrim prim. Equivalent to UsdGeomPlane::Get(prim.GetStage(), prim.GetPath()) for a valid prim , but will not immediately throw an error for an invalid prim.

inline explicit UsdGeomPlane(const UsdSchemaBase &schemaObj): Construct a UsdGeomPlane on the prim held by schemaObj . Should be preferred over UsdGeomPlane(schemaObj.GetPrim()), as it preserves SchemaBase state.

inline virtual ~UsdGeomPlane(): Destructor.

inline UsdAttribute GetDoubleSidedAttr() const

Planes are double-sided by default. Clients may also support single-sided planes.


Declaration	`uniform bool doubleSided = 1`
C++ Type	bool
Usd Type	SdfValueTypeNames->Bool
Variability	SdfVariabilityUniform

See also

UsdGeomGprim::GetDoubleSidedAttr()

inline UsdAttribute CreateDoubleSidedAttr() const: See GetDoubleSidedAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetWidthAttr() const

The width of the plane, which aligns to the x-axis when axis is ‘Z’ or ‘Y’, or to the z-axis when axis is ‘X’. If you author width you must also author extent.


Declaration	`double width = 2`
C++ Type	double
Usd Type	SdfValueTypeNames->Double

See also

UsdGeomGprim::GetExtentAttr()

inline UsdAttribute CreateWidthAttr() const: See GetWidthAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetLengthAttr() const

The length of the plane, which aligns to the y-axis when axis is ‘Z’ or ‘X’, or to the z-axis when axis is ‘Y’. If you author length you must also author extent.


Declaration	`double length = 2`
C++ Type	double
Usd Type	SdfValueTypeNames->Double

See also

UsdGeomGprim::GetExtentAttr()

inline UsdAttribute CreateLengthAttr() const: See GetLengthAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetAxisAttr() const

The axis along which the surface of the plane is aligned. When set to ‘Z’ the plane is in the xy-plane; when axis is ‘X’ the plane is in the yz-plane, and when axis is ‘Y’ the plane is in the xz-plane.


Declaration	`uniform token axis = "Z"`
C++ Type	TfToken
Usd Type	SdfValueTypeNames->Token
Variability	SdfVariabilityUniform
Allowed Values	X, Y, Z

See also

UsdGeomGprim::GetAxisAttr().

inline UsdAttribute CreateAxisAttr() const: See GetAxisAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetExtentAttr() const

Extent is re-defined on Plane only to provide a fallback value.


Declaration	`float3[] extent = [(-1, -1, 0), (1, 1, 0)]`
C++ Type	VtArray<GfVec3f>
Usd Type	SdfValueTypeNames->Float3Array

See also

UsdGeomGprim::GetExtentAttr().

inline UsdAttribute CreateExtentAttr() const: See GetExtentAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetDisplayColorAttr() const

It is useful to have an “official” colorSet that can be used as a display or modeling color, even in the absence of any specified shader for a gprim. DisplayColor serves this role; because it is a UsdGeomPrimvar, it can also be used as a gprim override for any shader that consumes a displayColor parameter.


Declaration	`color3f[] primvars:displayColor`
C++ Type	VtArray<GfVec3f>
Usd Type	SdfValueTypeNames->Color3fArray

inline UsdAttribute CreateDisplayColorAttr() const: See GetDisplayColorAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetDisplayOpacityAttr() const

Companion to displayColor that specifies opacity, broken out as an independent attribute rather than an rgba color, both so that each can be independently overridden, and because shaders rarely consume rgba parameters.


Declaration	`float[] primvars:displayOpacity`
C++ Type	VtArray<float>
Usd Type	SdfValueTypeNames->FloatArray

inline UsdAttribute CreateDisplayOpacityAttr() const: See GetDisplayOpacityAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetOrientationAttr() const

Orientation specifies whether the gprim’s surface normal should be computed using the right hand rule, or the left hand rule. Please see UsdGeom_WindingOrder for a deeper explanation and generalization of orientation to composed scenes with transformation hierarchies.


Declaration	`uniform token orientation = "rightHanded"`
C++ Type	TfToken
Usd Type	SdfValueTypeNames->Token
Variability	SdfVariabilityUniform
Allowed Values	rightHanded, leftHanded

inline UsdAttribute CreateOrientationAttr() const: See GetOrientationAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetXformOpOrderAttr() const

Encodes the sequence of transformation operations in the order in which they should be pushed onto a transform stack while visiting a UsdStage’s prims in a graph traversal that will effect the desired positioning for this prim and its descendant prims.

You should rarely, if ever, need to manipulate this attribute directly. It is managed by the AddXformOp(), SetResetXformStack(), and SetXformOpOrder(), and consulted by GetOrderedXformOps() and GetLocalTransformation().


Declaration	`uniform token[] xformOpOrder`
C++ Type	VtArray<TfToken>
Usd Type	SdfValueTypeNames->TokenArray
Variability	SdfVariabilityUniform

inline UsdAttribute CreateXformOpOrderAttr() const: See GetXformOpOrderAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetVisibilityAttr() const

Visibility is meant to be the simplest form of “pruning” visibility that is supported by most DCC apps. Visibility is animatable, allowing a sub-tree of geometry to be present for some segment of a shot, and absent from others; unlike the action of deactivating geometry prims, invisible geometry is still available for inspection, for positioning, for defining volumes, etc.


Declaration	`token visibility = "inherited"`
C++ Type	TfToken
Usd Type	SdfValueTypeNames->Token
Allowed Values	inherited, invisible

inline UsdAttribute CreateVisibilityAttr() const: See GetVisibilityAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdAttribute GetPurposeAttr() const

Purpose is a classification of geometry into categories that can each be independently included or excluded from traversals of prims on a stage, such as rendering or bounding-box computation traversals.

See UsdGeom_ImageablePurpose for more detail about how purpose is computed and used.


Declaration	`uniform token purpose = "default"`
C++ Type	TfToken
Usd Type	SdfValueTypeNames->Token
Variability	SdfVariabilityUniform
Allowed Values	default, render, proxy, guide

inline UsdAttribute CreatePurposeAttr() const: See GetPurposeAttr(), and also Create vs Get Property Methods for when to use Get vs Create. If specified, author defaultValue as the attribute’s default, sparsely (when it makes sense to do so) if writeSparsely is true - the default for writeSparsely is false.

inline UsdRelationship GetProxyPrimRel() const

The proxyPrim relationship allows us to link a prim whose purpose is “render” to its (single target) purpose=”proxy” prim. This is entirely optional, but can be useful in several scenarios:

In a pipeline that does pruning (for complexity management) by deactivating prims composed from asset references, when we deactivate a purpose=”render” prim, we will be able to discover and additionally deactivate its associated purpose=”proxy” prim, so that preview renders reflect the pruning accurately.

DCC importers may be able to make more aggressive optimizations for interactive processing and display if they can discover the proxy for a given render prim.

With a little more work, a Hydra-based application will be able to map a picked proxy prim back to its render geometry for selection.

Note

It is only valid to author the proxyPrim relationship on prims whose purpose is “render”.

inline UsdRelationship CreateProxyPrimRel() const: See GetProxyPrimRel(), and also Create vs Get Property Methods for when to use Get vs Create.

UsdPrim GetPrim() const: Return this schema object’s held prim.

SdfPath GetPath() const: Return the SdfPath to this schema object’s held prim.

inline explicit operator bool() const

Check if this schema object is compatible with it’s held prim and that the prim is valid.

A typed schema object is compatible if the held prim’s type is or is a subtype of the schema’s type. Based on prim.IsA().

An API schema object is compatible if the API is of type SingleApplyAPI or UsdSchemaType::MultipleApplyAPI, and the schema has been applied to the prim. Based on prim.HasAPI.

This method invokes polymorphic behaviour.

See also

UsdSchemaBase::_IsCompatible()

Returns: True if the help prim is valid, and the schema object is compatible with its held prim.

Public Static Functions

static inline UsdGeomPlane Define(const UsdStageRefPtr &stage, const SdfPath &path): Attempt to ensure a UsdPrim adhering to this schema at path is defined (according to UsdPrim::IsDefined()) on this stage.

Public Static Attributes

static const UsdSchemaType schemaType = UsdSchemaType::ConcreteTyped 

Compile time constant representing what kind of schema this class is.

See also

UsdSchemaType

Protected Functions

inline virtual bool _IsCompatible() const

Helper for subclasses to do specific compatibility checking with the given prim. Subclassess may override _isCompatible to for example check type compatibility or value compatibility on the prim.

Overrides exist for UsdTyped and UsdAPISchemaBase.

This check is called when clients invoke the bool operator.

Returns: True if the schema object is compatible with its held prim.

inline const TfToken _GetType() const

Helper for subclasses to get this schema’s type token.

Note

This diverges from Usd and returns a TfToken, since we don’t implements TfType.

Returns: The token representing the schema’s TfType.